Online RFQ

Laser Shutters & Optical Shutters | NM Laser Products

Laser Shutters & Optical Shutters | NM Laser Products

News

2023 Trade Shows

by

Visit NM Laser’s exhibition booth at the following photonics shows in 2023:

 

Contact us for more information.

2022 Trade Shows

by

We are pleased to announce NM Laser’s exhibition at the following photonics shows in 2022:

Visit our booth to see our products and discuss with us your laser shutter or optical shutter requirements.

Promotion Announcement

by

Mohammad Khaliki, Chief Executive Officer

 
NM Laser’s Board of Directors is pleased to announce the promotion of Mohammad Khaliki to Chief Executive Officer position, effective July 1st, 2021. Mohammad joined the company five years ago and has advanced through progressively more responsible positions in both Engineering and Executive departments.

 
 
NM Laser founder and ex-CEO, David C. Woodruff, will be serving as CFO and chairman for Board of Directors. David has exceptionally served as Chief Executive Officer for 30 years while establishing growth and innovation. We owe David a debt of gratitude for his service over the years. Thank you!

 
 
Please join us in congratulating Mohammad on his promotion as Chief Executive Officer.

 
 
Sincerely,
 
NM Laser Board of Directors

SPIE Optics + Photonics 2021

by

We are excited to announce NM Laser’s first post-pandemic exhibition at SPIE Optics + Photonics in San Diego California from August 3rd to 5th, 2021, Booth #434. After a year of virtual communication, it will be a great opportunity to see you all in-person and discuss topics such as:

  • Legacy Products Upgraded Specifications
  • Next Generation of Optical Shutters: LST-5VDC Direct Drive
  • Next Generation of Laser Shutters: Universal Non-Contact Shutter
  • Custom Laser or Optical Shutters to meet your needs

 
“In era of virtual communication, nothing compares to the in-person connections and conversations changing the world.”

Introducing Our Best Value Optical Shutter

by

LST-5VDC Direct Drive Optical Shutter

NM Laser Products introduces the best value optical shutter available in the entire market. The LST-5VDC electrical drive provides the simplest form for users with 5V direct drive (no controller needed).

Thermal management becomes negligible with only 2.5 W thermal power dissipation when holding open and improving to 1.2 W while at maximum repetition rate operation of 50 Hz.

LST-5VDC is targeted for biotech and laser vision sensing markets with the highest reliability life-time available (1 Billion Cycles).

Read the LST-5VDC specifications here.

Contact our sales or technical team for all inquiries.

COVID-19 UPDATE | NM LASER

by

During these difficult times, NM Laser team’s main goal has been to maintain the safety of employees while meeting essential customer needs. Our medical, bio-tech, and OEM customers have identified NM Laser as an essential and critical parts supplier which granted us continuous operation from the beginning of the global shutdown in early 2020. We understood the importance of supporting customers that were producing critical safety equipment and tools for scientific researchers of the COVID-19 virus.
 
Our Business Continuity Plan was the key component in staying prepared for such a natural disaster. For the safety of our employees, NM Laser follows strict guidelines, such as: 6 ft. social distancing, mandatory masks, minimum external visits, staggered lunches and breaks, and cleanroom grade gloves. In order to meet customer demands, we were prepared with full inventory on raw materials, sub-assemblies, and FGI. Meanwhile, dual and triple supply chain sources were created to meet any on-demand needs. Our facility is well equipped and tooled for the most efficient lean manufacturing.
 
As we continue to look forward, the global market is preparing for a bounce back stronger than pre-pandemic. Our employees feel safe and we are ready to increase capacity to meet customer needs. The pandemic has proven the importance of preparedness. A strong supply chain in any market promotes a strong rebound from all disasters.

 
 
Sincerely,
 
Mohammad Khaliki, Executive V.P.

2020 TRADE SHOWS

by

We are pleased to announce NM Laser’s exhibition at following photonics shows in 2020:

  • SPIE Photonics West Exhibition – Feb. 4th – Feb. 6thAt Moscone Center, San Francisco, CA, USA
  • SPIE Optics + Photonics Exhibition (Digital Forum)– Aug. 23rd – 27thAt San Diego Convention Center, San Diego, CA, USA

Discussions on laser shutter technology, demonstration, product capabilities, and application needs. Products include laser shutters, high-speed laser shutters, safety interlock shutters, and high-power laser shutters. We will discuss our next generation diamond laser shutter technology with existing customers and launch our new laser shutter controller CX4000B.

NEW DIAMOND TECHNOLOGY

by

NM Laser Products has been manufacturing laser shutters for over 30 years using patented flexure technology. Our laser shutters are customized optically and mechanically for specific OEM grade customer applications. This customization limits the shutter per specific application or system.
 
NM Laser is pleased to announce the next generation of laser shutter that will be in production in the near future using patented diamond technology. The diamond technology is designed for high irradiance, high laser induced damage threshold (LIDT) with broadband wavelength absorption.
 
The Diamond technology is designed using advanced material science, electromechanical, and magnetic systems:

  • Universal wavelength between 150-11,000 nm with one device.
  • Cleanroom certified, baked at 200C.
  • High irradiance and Laser Induced Damage Threshold (LIDT).
  • Highest thermal conductivity material known to mankind.
  • Highest thermal shock resistance known.
  • Perform as safety and process shutter in one device.
  • Small packaging size with simple electronic drive.
  • Low shock and vibration during operation.

 
NM Laser’s R&D team is working diligently to release product into beta site testing limited to OEM customers. Product release date will be announced soon.

Copyright © 2021, NM Laser Products, Inc. All rights reserved.